Production of the model of the sculpture Mirror for Professor Michal Gabriel. An example of a more challenging project milled by a robot from XPS polystyrene. Due to the complicated topology, the model had to be milled in 68 parts. The milling required approximately 120 hours of machine time.
Demonstration of milling a life-size model of a human statue by a robot from XPS polystyrene. Milling each of the figures consumed approximately 18 hours of machine time.
Example of milling a relief from a block of glued lime wood. The relief with dimensions approx. 135 x 100 x 14cm was milled with 16mm diameter tools. Selected details were then cut with a 6mm diameter tool. The production consumed approx. 65 hours of machine time.
Example of a simple 3D milling project: a life-size bust made of XPS polystyrene.
The complexity of the realization is about 6 hours of machine time.
