FaVU / 3D studio / Pracoviště 3D tisku / Inventory

•Fused Deposition Modeling (FDM) printing technology.

•Printing material ABS plastic and soluble SR support.

•Printing chamber is 200 x 200 x 300 mm.

•Layer thickness - 0.25 or 0.35 mm.

•ABS plastic models are strong, dimensionally stable and can be sanded and coated.

•Colour printing is also possible in basic colours, white, black, blue, yellow, red, green or steel grey.

•The print shop is located in room 118 in building U5.

•The person responsible for the operation is Doc. Mgr. Tomáš Medek.

•3D printing technology from gypsum composite

•Printer workspace (xyz) - 200 x 250 x 200 mm.

•Layer thickness - 0.1 mm.

•Fast detailed light grey (or colour) 3D printing.

•The print is made without support material, so it is suitable for more complex and detailed models with cavities, etc.

•To achieve the strength of the model, infiltration with a reinforcing substance (cyanoacrylate, epoxy resin) is necessary.

•The surface of the infiltrated model is well processed by sanding and puttying.

•It is very suitable for the production of models for moulding.

•The printer is located in room 123 on the ground floor of building U5.

•The person responsible for the operation is Bc. Jiří Pec, DiS.

•Fused Filament Fabrication (FFF) printing technology.

•Printing materials ABS, PLA, ASA, Pet-G, Flex, Nylon and support material PVA, HIPS.

•Print chamber is 420 x 297 x 210 mm (A3).

•ABS plastic models are strong, dimensionally stable and can be sanded and coated.

•Colour printing is also possible in different colours according to the filament offer.

•The printer is located in room 118 in building U5.

•The person responsible for the operation is Doc. Mgr. Tomáš Medek.

•Fused Deposition Modeling (FDM) printing technology.

•Printing material thermoplastic ASA, ABS-M30.

•Support material: soluble QSR Support

•Printing accuracy is +/- 0.2 mm per part or +/- 0.002 mm/per 1 mm.

•Size of print chamber: 254 × 254 × 254 mm

•The printer is located in room 118 in building U5.

•The person responsible for the operation is Doc. Mgr. Tomáš Medek.

•SLA (Streolithography) printing technology.

•3D printing in high resolution based on digital 3D models.

•3D data must be standard 3D print ready - error free.

•145 × 145 × 175 mm print chamber size.

•Layer resolution up to 100 microns, laser resolution (contours in each layer) up to 140 microns.

•3D printing on the laser photopolymer printer is aqueous for printing small artifacts with high demands on the quality of detail.

•The -3D printer is located in the U5 building in the FaVU 3D studio.

•The person responsible for the operation is Bc. Jiří Pec, DiS.